hostcolumbus.blogg.se

1. #Password recovery asa 5505 cisco how to
2. #Password recovery asa 5505 cisco password

The enable password also lets you log into ASDM with a blank username if you do not configure HTTP authentication (see the “Configuring Authentication for CLI and ASDM Access” section. The enable password lets you enter privileged EXEC mode if you do not configure enable authentication (see the “Configuring Authentication to Access Privileged EXEC Mode (the enable Command)” section). Use the no password command to restore the password to the default setting in 9.1(2) and later, the no form of the command removes the password. Normally, you only see this keyword when you enter the show running-config passwd command. If for some reason you need to copy the password to another ASA but do not know the original password, you can enter the passwd command with the encrypted password and the encrypted keyword. The password is saved in the configuration in encrypted form, so you cannot view the original password after you enter it. You can use any character in the password except a question mark or a space. The password is a case-sensitive password of up to 16 alphanumeric and special characters. 9.1(1): The default password is “cisco.” 9.1(2) and later: There is no default password. To set the login password, enter the following command: PrerequisitesĮnable Telnet access according to the “Configuring Telnet Access” section. You also use this password when accessing the ASASM from the switch with the session command. The login password is used for Telnet access when you do not configure Telnet authentication (see the “Configuring Authentication for CLI and ASDM Access” section). Feature History for the Hostname, Domain Name, and Passwords.This section includes the following topics: Configuring the Hostname, Domain Name, and PasswordsĬonfiguring the Hostname, Domain Name, and Passwords.

#Password recovery asa 5505 cisco how to

This chapter describes how to configure basic settings on the ASA that are typically required for a functioning configuration and includes the following sections:

Completing Interface Configuration (Routed Mode).Starting Interface Configuration (ASA 5505).Starting Interface Configuration (ASA 5510 and Higher).Configuring High Availability and Scalability.Configuring the Transparent or Routed Firewall.Configuring the Switch for Use with the ASA Services Module.